Best Sellers

MXO-RACING EXR62-SA(SANWA) V2 Super Micro SurfaceRX/4CH/FH3/FH4/

$39.99
No tax
Quantity
  Security policy

Pay with secure method

Thank you for choosing MXO-RACING brand products, please read this document carefully before use!

EXR62-SA is a small car receiver compatible with SANWA FH3/FH4 protocol for 1:18~1:10~1:8. Thanks to its small size, it can be easily installed on any frame.

Features

1)Small size: 21.0*21.4*12.9mm; ​
2)Super light: 4.2g; ​
3)Working voltage: 3.5~9.0V; ​
4)Ultra-short antenna (31mm); ​
5)Built-in BIND switch; ​
6)Compatible with SANWA FH3/FH4 protocol

Connection Diagram

Bind

  First press the BIND switch on the receiver, then power on the receiver (the LED on the receiver is flashing at this time), then adjust the remote control to the BIND interface and set it to FH3 or FH4 mode, and finally start the frequency operation, when the LED on the receiver When it changes from low-speed flashing to fast flashing and then turns off, it indicates that the linking is successful. ​When the LED on the receiver is always on, it means that the receiver receives the signal from the remote control. ​When the LED on the receiver is off, it means that the receiver does not receive the signal from the remote control.

Antenna

  EXR62-SA adopts ultra-short antenna design. After receiving the product, please erect the antenna before using it, so as to achieve the best effect.

Note: Try to keep the antenna away from carbon plates and metal parts when using it!

Shipment

  All items will be checked carefully before shipment.We will pack and ship the parcel with 5 day. ( There will be delay when holidays. )
  Tracking information is available within 1-4 days after shipment. We will ship via SF Express or FedEx & UPS. Usually, the shipping time is 7-45 business days. If you can't receive your item, please feel free to contact me for help.

Service Time

  Beijing: From 9:00 am to 18:00 pm ​
  London: From 2:00 am to 11:00 pm ​
  Moscow: From 4:00 pm to 13:00 pm ​
  New York: From 21:00 pm to 6:00 am

Feedback

  If you are not satisfied with the items, please feel free to contact me for solution instead of leaving neutral or negative feedback, We will try our best to solve the problem.
  ​Please leave positive feedback and 5 stars if you are satisfied with our items and services. :) Thank you ​
  Please contact us if you have any feedback or suggestions, thank you! ​
  Email: [email protected] & [email protected]

DECLARATION

  1)The EXR62 series RX are Not a copy or fake products of other companies; ​
  2)MXO-RACING brand guaranteed its high quality and continuous technical service.

50 Items

16 other products in the same category

CROSSOVER-RX Ma-RX62HE-A2/A2+(FLYSKY-AFHDS-2A) Built-in Brushless ESC/7CH MicroRX/TELEM

Brands: CROSSOVER-RX
$25.99

CROSSOVER-RX Ma-RX62HE-A2 series receivers were developed upon Ma-RX42E-X series receivers, with a built-in 7A/2S(5A/3S) brushless ESC and 6 independent servo ports on board, in this case, Ma-RX62HE-A2 receiver can provide more power and more channels to work on larger size or more complicated model planes.Besides, the advance version of Ma-RX62HE-A2 series receivers supports TELEM function, in order to tell the difference from the normal versions, one + is added to A2 of MA-RX62HE.

CROSSOVER-RX Ma-RX42-D/D+(DSMX/2) Built-in ESC/5CH MicroRX/TELEM

Brands: CROSSOVER-RX
$26.99

MA-RX42-D series of receivers are upgraded from the old version(2016), smaller and more stable with additional TELEM function.  It still provides 4 independent output ports and 1 integrated 5A/1S brush ESC. Besides, the advance version of MA-RX42-D series receivers supports TELEM function, in order to tell the difference from the normal versions, one + is added to D of MA-RX42.