Best Sellers

CROSSOVER-RX AR3201G-D V2.0(DSMX/2) Built-in2 brushed ESCs/6CH MicroRX/TELEM/SR3X/GYRO

$32.99
No tax
DSMX/2
Quantity
  Security policy

Pay with secure method

CROSSOVER-RX AR3201G-D(DSMX/2) Built-in2 brushed ESCs/6CH MicroRX/TELEM/SR3X/GYRO

DSMX/2

    AR3201G-D is a kind of highly integrated receiver(built-in two brush 5A ESCs, one receiver, SR3X  3-axis(option), DCDC-5A/1A boosting power). It is very helpful for DIY or rebuilding model airplanes weight between 25-100g.

Features

1)Modulation:Compatible Compatible DSMX/2 ​

2)Small size:  22.0*16.0*6.2mm(not including antenna) ​

3)Super light: 1.5g(including antenna) ​

4)Working voltage:3.0~5.0V ​

5)DCDC-5V/1A boosting power ​

6)With built-in 2 brushed ESCs (5A/1S , Lock starting function) ​

7)Integrated with SR3X 3-AXIS function (for option, can turn off, sensitive adjustable)

8)Binding automatically ​

9)Support TELEM function( voltage message returns to transmitter) ​

10)Support online updating ​

11)Support GUI setting function ​12)Supports differential speed mode

Connection Diagram

M-BUS Equipment port

M-BUS Equipment port is multi-functional: ​

1) firmware updating/function set up; ​

2) output CH5 signal; ​

3) output SBUS signal; ​

4) Bypass working mode port

Start-Lock Function

    Start-Lock Function is the onboard brush ESC function of preventing brush motor from starting by mistake.  It can protect the brush motor from starting even throttle stick not at the lowest position when the receiver is powered. ​As soon as the receiver gets the signal and the throttle stick on your transmitter is at the lowest position for 2 seconds the first time, Start-Lock will be released then, the brush motor will run when the throttle stick is pushed.

Auto binding

    As it is difficult to reach the binding button when the receiver has been installed inside the plane, we developed self-binding function, it works like this:

    The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing), then complete the binding operation according to your transmitter binding manual.

TELEM function

    TELEM function is useful on monitoring battery voltage, receiver working voltage and its signal strength as well as its working temperature in real time, through which customer can get working state of receiver and battery discharging state under control, so flying out of control range and over discharging will rarely happen ( for brushless motor rotation speed or flight height monitoring, customer needs to choose a more advanced receiver) ​

    NOTE: The effective control range of TELEM function depends on transmitter, it is possible that this would happen: the working range of the receiver is far more than TELEM function effective range, it is normal and alright!

SR3X 3-AXIS function

    SR3X is a flight assistance system developed specially on fixed wing model airplanes. It can not only help the beginner control model airplane, but also help the senior pilots get better and stable flight attitude.

    ​SR3X 3-axis gets three working modes: shut off; low sensitive working mode, high sensitive working mode. Customer can set up CH5 on the 3-gear switch of the transmitter through which decides its working mode. The blue LED on AR5202 is for indicating the working mode:

1) blue LED light is shut off indicates SR3X 3-axis is turned off.

2) Solid bright blue LED indicates low sensitive mode.

3) blinking LED indicates high sensitive mode.

GUI software download address

    Download link: update.crossover-rx.com/mxo.zip

How to connect RX to GUI software

    The user needs a USB programmer (USB MX-PG02, when used on AR3201G-X V2.0, the switch on the programmer is set to the I position) before using the GUI software to configure the receiver function or upgrade the firmware, and set the USB programmer’s ribbon cable Connect one end to the M-BUS interface of the receiver, and the other end to the PC. After opening the GUI software, select the correct port, click "Connect", and then each configurable function module on the receiver will load and display the current setting information of the receiver.

AR3201 series receivers have the following 12 versions

H7160e138547a48e4a7e2ad9683d2d6cdm.jpg

Shipment

    All items will be checked carefully before shipment.We will pack and ship the parcel with 5 day. ( There will be delay when holidays. )

    Tracking information is available within 1-4 days after shipment. We will ship via SF Express or FedEx & UPS. Usually, the shipping time is 7-45 business days. If you can't receive your item, please feel free to contact me for help.

Service Time

    Beijing: From 9:00 am to 18:00 pm ​

    London: From 2:00 am to 11:00 pm ​

    Moscow: From 4:00 pm to 13:00 pm ​

    New York: From 21:00 pm to 6:00 am

Feedback

    If you are not satisfied with the items, please feel free to contact me for solution instead of leaving neutral or negative feedback, We will try our best to solve the problem. ​   

    Please leave positive feedback and 5 stars if you are satisfied with our items and services. :) Thank you

DECLARATION

1)The AR3201 series RX are Not a copy or fake products of other companies;

​2)MXO-RF and CROSSOVER-RX brand guaranteed its high quality and continuous technical service.

50 Items

You might also like Products

16 other products in the same category

CROSSOVER-RX Ma-RX62HE-A2/A2+(FLYSKY-AFHDS-2A) Built-in Brushless ESC/7CH MicroRX/TELEM

Brands: CROSSOVER-RX
$25.99

CROSSOVER-RX Ma-RX62HE-A2 series receivers were developed upon Ma-RX42E-X series receivers, with a built-in 7A/2S(5A/3S) brushless ESC and 6 independent servo ports on board, in this case, Ma-RX62HE-A2 receiver can provide more power and more channels to work on larger size or more complicated model planes.Besides, the advance version of Ma-RX62HE-A2 series receivers supports TELEM function, in order to tell the difference from the normal versions, one + is added to A2 of MA-RX62HE.